Event Studio Precision 8 Powered Monitors
With the Event Studio Precision 8 Powered Monitors, the engineers at Event Electronics have come up with a totally new design that surpasses anything they've done to date. The Studio Precision 8 monitors bring a whole new dimension to the direct field monitoring experience.
Tight, punchy, in-your-chest bass
First on the list for Event was a commitment to provide unsurpassed low-frequency response. That spawned the development of a custom 8" polypropylene cone driver (complete with neodymium magnet) an exceptional performer that boasts ultralow distortion characteristics, incredible strength, and more output-per-watt than traditional woofer designs.
Next, the enclosure had to have dual ports. But not just any ported enclosure would do. Hidden behind the front baffle is a unique port design that provides exceptional low-frequency coupling into the room, low-distortion output, and superior low-frequency transient response. You can truly feel the tremendous LF response not just hear it.
The combination of the drivers, ports, and enclosure allow accurate reproduction of percussion and bass instruments without introducing new overtones or artificially hyped frequencies.
Soaring highs, expansive soundscape
The soft-dome neodymium high-frequency driver produces a broad, flat radiation pattern that doesn't require corrective equalization (which adds tonal coloration and robs an amplifier of headroom). The driver creates an expanded stereo soundstage that's enormous and has incredibly precise imaging with even subtle panning movements easily discernable.
High-powered performance
The biamplified Studio Precision 8 speakers deliver 280W per speaker (200W LF driver/80W HF driver) so you'll always have plenty of headroom for even the most demanding applications. The amplifier circuitry uses low-noise semiconductors and audio-grade film capacitors, giving the system enhanced dynamic range as well as exceptionally low noise and low distortion characteristics. Toroidal transformers greatly reduce mechanical and electrical noise.
Topping things off are continuously variable input sensitivity plus low- and high-frequency trim controls. There's also a switchable 80Hz high-pass filter for bass management in surround-sound applications. And for easy connection, there are both balanced XLR and 1/4" inputs.
3/4" MDF cabinets ensure that the sound emanating from the speakers is free from artificial tones created by unwanted resonance.
Event Studio Precision 8 Powered Monitors Features:
- LF driver: Magnetically shielded, 8" mineral-filled polypropylene cone with neodymium magnet, 1-1/2" diameter high-temperature voice coil, and damped rubber surround
- HF driver: Magnetically shielded, one-inch diameter ferrofluid-cooled soft dome neodymium radiator
- Frequency response: 35Hz-20kHz, ±3dB, ref. 500Hz
- Amplifier power: Biamplified, 280W, (200W LF driver/80W HF driver) toroidal transformer
- Crossover: 2.6kHz, active asymmetrical fourth-order
- Controls: Continuously variable input sensitivity; continuously variable high-frequency trim; continuously variable low-frequency trim; switchable 80Hz second-order high-pass filter
- Inputs: balanced XLR and 1/4"
- Indicators: Power-on/Clip LED
- Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, internal fuse, and magnetic shielding
- 12-1/2"W x 16"H x 11-13/16"D
- 32-1/2 lbs. each
You'll hear it all with these. Brings a whole new direction to the direct field monitoring experience!
IN STOCK!
Music Toyz Price $1,299.00
Event Studio Precision 6 Active Monitors (Pair)
Boasting many of the same features as their big brother, the Studio Precision 8s, these high-end monitors utilize a 6.5", mineral-impregnated polypropylene cone low-frequency driver. The neodymium magnet gives the driver exceptionally low distortion characteristics, makes it stronger, and provides a greater level of output efficiency than a traditional woofer. The LF driver is paired with a 1" soft dome, high-frequency radiator that expands the stereo soundstage compared to previous models. The HF driver also has a neodymium magnet and produces a broad, flat radiation pattern that doesn't require corrective equalization. This results in a large sweet spot, so the mix position can be very personal, or shared with a larger group. The dual, large-diameter, linear-flow bass ports make for a deeper and more accurate low frequency response than similar-sized systems. The powerful amplifier delivers 280W per speaker(200W LF driver/80W HF driver). The custom-designed circuitry features low-noise semiconductors and audio-grade film capacitors for enhanced dynamic range as well as lower noise and distortion. The unit also includes continuously variable low- and high-frequency trim controls, a continuously variable input sensitivity control, and a switchable 80Hz high pass filter. Balanced XLR and 1/4" inputs are provided for easy connection.
Event Studio Precision 6 Active Monitors (Pair) Specifications:
- LF driver: Magnetically shielded, 6.5" mineral-filled polypropylene cone with neodymium magnet, 1-1/2" diameter high-temperature voice coil, and damped rubber surround
- HF driver: Magnetically shielded, 1"-diameter ferrofluid-cooled soft dome neodymium radiator
- Frequency response: 40Hz-20kHz, ±3dB, ref. 500Hz
- Amplifier power: Biamplified, 280W(200W LF driver/80W HF driver), torroidal transformer
- Crossover: 2.6kHz, active asymmetrical fourth-order
- Controls: Continuously variable input sensitivity, continuously variable high-frequency trim, continuously variable low-frequency trim, switchable 80Hz second-order high pass filter
- Inputs: Balanced XLR and 1/4"
- Indicators: Power-on/Clip LED
- Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, internal fuse, magnetic shielding
- 10-3/4"W x 13-5/8""H x 10"D
Event Studio Precision 6 Active Monitors (Pair) Features:
- Neodymium magnets produce lower distortion and higher output efficiency than ceramic magnets
- Cabinet design delivers deep low-frequency response and is perfectly sized for smaller studios
- 3/4" MDF construction ensures pure and clean sound with no artificial tones from cabinet resonance
- Dual-port design allows exceptional low-frequency coupling into the room, low-distortion output, and low-frequency transient coupling
World-class reference monitoring that exceeds your sonic expectations.
IN STOCK!
Music Toyz Price $999.00
Event ALP5 Active Linear Phase 5 Monitor (Pair)
The Event ALP5 Phase 5 monitors are driven by 80 watts of biamplified power for smoother response at low level playback. Time- and phase-corrected driver alignment with corrective circuitry, LF response down to 53Hz @ -3dB, and MDF cabinet construction make these monitors an exceptional buy and solid choice for reliable mix monitoring in small studio spaces.
Event ALP5 Active Linear Phase 5 Monitor - Pair Specifications:
- Low Frequency Driver
- 5.25" magnetically shielded mineral-filled polypropylene cone with high temperature voice coil and damped rubber surround
High Frequency Driver
- 1" magnetically shielded soft
- dome neodymium radiator with ferrofluid-cooled voice coil
Frequency Response
- 53Hz - 20kHz, ±3dB, Ref 500Hz
Crossover
- 2.6kHz active fourth-order
Amplifier Power
- 50W LF Driver / 30W HF Driver
Noise
- >100dB below full output, 20Hz - 20kHz bandwidth, unweighted
Input Connectors
- XLR and 1/4" connectors, accept balanced or unbalanced sources; RCA connector, accepts unbalanced sources
Protection
- RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, internal mains fuse
- (specification subject to change)
Event ALP5 Active Linear Phase 5 Monitor - Pair Features:
- Exceptional midrange clarity
- Superb stereo imaging
- Bigger low end
- Louder playback
Perhaps the best monitors in this size range. Order today and we guarantee you won't be disappointed.
IN STOCK!
Music Toyz Price $329.99
Event Tuned Reference 8 TR8 Active Monitors
The Event Tuned Reference 8 TR8 Active Monitors biamplified system delivers stunning sound quality for a stunningly low price. The TR8 features the same ferrofluid-cooled natural silk-dome tweeter and 8" polypropylene cone used on the award-winning 20/20bas monitors. A powerful amp and active fourth-order crossover deliver impeccable sound. Magnetically shielded. Protection circuitry for RF interference, output current limiting, over temperature, and turn off/on transients. Balanced XLR and 1/4" inputs; unbalanced RCA inputs. Power on and clip LEDs. 35Hz-20kHz frequency response. 10-1/4"W x 14-3/4"H x 11-3/4"D.
Event Tuned Reference 8 TR8 Active Monitors Specifications:
- LF Driver: magnetically shielded 8" mineral-filled polypropylene cone with 1-1/2" diameter high-temperature voice coil and damped rubber surround
- HF Driver: magnetically shielded 25mm ferrofluid-cooled silk dome Frequency Response: 35Hz - 20kHz, ±3dB (-2dB @ 38Hz), Ref. 500Hz
- Frequency Response: 38Hz - 20kHz, +/-3dB, ref 500Hz
- Power Output (SPL): >108dB
- Crossover: 2.6kHz, active fourth-order
- Inputs: Balanced XLR and 1/4"; unbalanced RCA
- Indicators: Power-On LED
- Noise: >100dB below full output, 20kHz bandwidth, unweighted
- Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, internal fuse.
- Dimensions: 10-1/4"W x 14-3/4"H x 11-3/4"D
Event Tuned Reference 8 TR8 Active Monitors Features:
- Tuned reference biamplified system
- Delivers stunning sound quality for a stunningly low price
- Ferrofluid-cooled natural silk-dome tweeter
- 8" polypropylene cone
- Same speakers as used on the award-winning 20/20bas monitors
- Powerful new-design amp
- 4th-order crossover
- Magnetically shielded
- Protection circuitry for RF interference, output current limiting, over temperature, and turn off/on transients
- Balanced XLR and 1/4" inputs
- Unbalanced RCA inputs
- Power on and clip LEDs
- 35Hz-20kHz frequency response
- 10-1/4"W x 14-3/4"H x 11-3/4"D
The biggest bang-for-the-buck in all the monitor world...
Currently out of stock. Check back soon or call for availability...
Music Toyz Price $499.00
Event Tuned Reference 8XL Biamplified Monitors
The Event Tuned Reference 8XL Biamplified Monitors are intended for the monitoring environment that requires high volume levels. They use the same design as the original TR8 with powerful independent amplifiers that deliver 150W of biamplified (100W LF; 50W HF) power to each monitor. The amplifiers use a high-performance toroidal transformer for superior noise characteristics and have an LED power indicator. Design employs a 2.6kHz, active fourth-order crossover. The Tuned Reference also has RF interference, magnetic shielding, output current limiting, over temperature, turn-on/off transients, subsonic filter, and internal fuse protection. 8" LF driver has a mineral-filled polypropylene cone with 1-1/2" diameter high-temperature voice coil and damped rubber surround, is coupled with a 1" ferrofluid-cooled silk dome HF driver. The monitors include balanced XLR and 1/4" inputs, as well as unbalanced RCA ins. Frequency response: 35Hz - 20kHz, ±3dB (-2dB @ 38Hz), ref. 500Hz.
Event Tuned Reference 8XL Biamplified Monitors Specifications:
- LF Driver: magnetically shielded 8" mineral-filled polypropylene cone with 1-1/2" diameter high-temperature voice coil and damped rubber surround
- HF Driver: magnetically shielded 25mm ferrofluid-cooled silk dome Frequency Response: 35Hz - 20kHz, ±3dB (-2dB @ 38Hz), Ref. 500Hz
- Frequency Response: 35Hz - 20kHz, +/-3dB, ref 500Hz
- Power Output (SPL): >111dB
- Crossover: 2.6kHz, active fourth-order
- Amplifier Power: 150 watts (150W LF Driver / 50W HF driver)
- Inputs: Balanced XLR and 1/4"; unbalanced RCA
- Noise: >100dB below full output, 20kHz bandwidth, unweighted
- Indicators: Power-On LED
- Protection: RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, internal fuse
- Dimensions: 10-1/4" W x 14-3/4" H x 11-3.4" D
Event Tuned Reference 8XL Biamplified Monitors Features:
- 150W biamplified power: 100W to the LF driver and 50W to the HF driver
- LF driver: Magnetically shielded 8" mineral-filled polypropylene cone with 1-1/2" diameter high-temperature voice coil and damped rubber surround
- HF driver: Magnetically shielded 1" ferrofluid-cooled silk dome
- Frequency Response: 35Hz - 20kHz, ±3dB (-2dB @ 38Hz), ref. 500Hz
- Power output (SPL): >111dB
- 2.6kHz, active fourth-order crossover
- Amplifier power: 150W (150W LF driver/50W HF driver)
- Inputs: Balanced XLR and 1/4"; unbalanced RCA
- Noise: >100dB below full output, 20kHz bandwidth, unweighted
- Power-on LED indicators
- Protection: RF interference, output current limiting, over temperature, turn-on/off transient protection, subsonic filter, and internal fuse
- 10-1/4"W x 14-3/4"H x 11-3/4"D
These monitors have serious oomph. The et accurate sound with all the headroom you need for live tracking!
Currently out of stock. Check back soon or call for availability...
Music Toyz Price $599.00
Event TR6 Tuned Reference 6 Active Monitors
The Event TR6 Tuned Reference 6 Active Monitors are perfect for the small sound studio. 6.5" mineral-filled polypropylene cone LF drivers with 1-1/2" voice coils and damped rubber surrounds, 1" ferrofluid-cooled natural silk-dome tweeters, and 2.6kHz active 4th-order crossovers provide peerless monitoring accuracy for amazingly low outlay. 106dB output is way higher than speakers with comparable wattage, 80W biamplified 50W low frequency and 30W high frequency. Tuned to provide flat frequency response for a true sonic reference when mixing.
Event TR6 Tuned Reference 6 Active Monitors Specifications:
- LF Driver: Magnetically shielded 6.5" mineral-filled polypropylene cone with 1" diameter high-temperature voice coil and damped rubber surround
- HF Driver: 1" magnetically shielded natural silk dome with ferrofluid-cooled voice coil.
- Frequency Response: 45Hz - 20kHz, ±3dB, ref. 500Hzz
- Power Output (SPL): >106dB
- Crossover: 2.6kHz active fourth-order asymmetrical
- Inputs: Balanced XLR and 1/4"; unbalanced RCA
- Input sensitivity control range: 20dB
- Indicators: Power-On LED
- Noise: >100dB below full output, 20kHz bandwidth, unweighted
- Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, internal fuse
- Dimensions: 8.25" W x12.5" H x 10" D
Event TR6 Tuned Reference 6 Active Monitors Features:
- Amp:
- 50W low frequency
- 30W high frequency
LF driver:
- 6-1/2" mineral-filled polypropylene cone
- 1-1/2" voice coil
- Damped rubber surround
- Magnetically shielded
Tweeter:
- 1" natural silk dome
- Ferrofluid-cooled
- Magnetically shielded
>106dB output
- Frequency response: 45Hz-20Khz, +/-3dB, ref. 500
- 2.6kHz active 4th-order crossover
- Balanced XLR and 1/4" inputs
- Unbalanced RCA input
Protections:
- RF interference
- Output current limiting
- Over temperature
- Turn on/off transient
- Subsonic filter
- Internal fuse
Perfect in size and quality for stellar home studio mixing.
Currently out of stock. Check back soon or call for availability...
Music Toyz Price $399.00
Event 20/20 V2 Passive Monitor System
The Event 20/20 Passive Monitor Systems were developed to put true world-class reference monitoring into the hands of musicians previously shut out by the high cost of those systems. These favorites have helped set the standard for excellence in biamplified direct field monitor systems. Recording engineer Francis Buckley took the very first pair of 20/20s and won a Grammy for a project he mixed on them.
That legacy continues with the 20/20 V2 System. They have the time-tested low- and high-frequency driver elements found in the original 20/20: a one-inch silk dome, high-frequency driver specially designed to be superbly accurate yet non-fatiguing to your ears and an 8" mineral-impregnated, polypropylene cone, low-frequency driver that delivers fat, punchy, un-hyped bass. Also from the original: the active asymmetrical fourth-order crossover with incredibly accurate phase response for phenomenal stereo imaging.
I/O includes balanced XLR and 1/4" inputs. The V2 Passive Monitor units also feature continuously variable input gain control, full protection circuitry, and magnetic shielding.
Event 20/20 V2 Passive Monitor System Specifications:
- LF Driver: magnetically shielded 8" mineral-filled polypropylene cone with 1-1/2" diameter high-temperature voice coil and damped rubber surround
- HF Driver: magnetically shielded 25mm ferrofluid-cooled silk dome
- Crossover: 2.2kHz, second order
- Frequency Response: 50Hz - 20kHz, ±3dB, Ref. 500Hz
- Power Handling: 150W program, 200W peak per side
- Sensitivity: 88dB @ 1W, 1m Cabinet: 5/8" vinyl-laminated MDF Connectors: Red and black five-way binding posts on 3/4" centers
- Dimensions: 10-1/4" W x 14-3/4" H x 11-3/4" D
- Weight: 22 lbs each
Event 20/20 V2 Passive Monitor System Features:
- LF driver: magnetically shielded 8" mineral-filled polypropylene cone with 1-1/2" diameter high-temperature voice coil and damped rubber surround
- HF driver: magnetically shielded, one inch ferrofluid-cooled silk dome
- Frequency response: 38Hz-20kHz, ±3dB (-2dB @ 38Hz), ref. 500Hz
- Crossover: 2.6kHz, active fourth order
- 150W program, 200W peak power handling per side
- Inputs: Balanced; combination XLR - 1/4"; accepts balanced or unbalanced sources
- Input sensitivity: 1.1V input produces full output with input level control at maximum
- LF trim: Continuously variable control; max boost/cut settings produce ±3dB @ 100Hz, ±2dB @ 400Hz
- HF trim: Continuously variable control; max boost/cut settings produces ±3dB above 2.6kHz
- Protection: RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, resettable mains circuit breaker
- Cabinet: 5/8" vinyl-laminated MDF
- Dimensions: 10-1/4"W x 14-3/4"H x 11-3/4"D
- Weight: 30 lbs. each
Superbly clear, detailed sound that's flat and impressively uncolored can be yours.
Currently out of stock. Check back soon or call for availability...
Music Toyz Price $299.00
