ATH-T22
With the ATH-T22 Dynamic Stereo Headphones, Audio-Technica has achieved outstanding sound quality and long-wearing listening comfort. These dynamic headphones offer a secure, comfortable ear-fitting design for long-wearing listening and sophisticated driver technology for sonic clarity. The headphones feature proprietary 40 mm drivers and A-T’s innovative self-adjusting lightweight headband and generously padded ear cushions for comfortable listening.
- Self-adjusting lightweight headband for long-wearing listening comfort
- Circumaural design ensures superior isolation
- Rotating earpieces for easy one-ear monitoring
- Gold-plated 1/8" (3.5 mm) stereo connector and 1/4" (6.3 mm) adapter
- Maximized power handling capability
- Clean, linear low end response
Features
Type |
Closed-back Dynamic |
Driver Diameter |
40 mm |
Frequency Response |
20-22,000 Hz |
Maximum Input Power |
500 mW at 1 kHz |
Sensitivity |
100 dB |
Impedance |
32 ohms |
Weight |
6.0 oz (170 g) without cable |
Cable |
9.8' (3.0 m) |
Connector |
1/8" (3.5 mm) stereo mini plug, snap on 1/4" (6.3 mm) adapter |
Musictoyz.com Price $39.95
ATH-M50
Audio-Technica has introduced a straight-cable version, ATH-M50s, of its flagship ATH-M50 headphones. Designed to provide an exceptionally natural response for professional monitoring/mixing, the headphones feature a closed-back, collapsible design with 45 mm neodymium drivers, circumaural ear pieces (180° swivel) and luxuriously padded ear cushions. A straight cable at the left earpiece terminates to a gold-plated mini-plug with included screw-on ¼" adapter.
Audio-Technica’s sophisticated driver technology and superior components deliver exceptional power handling and very high SPL capabilities while maintaining clarity of sound throughout their extended range, with deep, accurate bass and outstanding high-frequency extension. The headphones feature proprietary large-aperture drivers with neodymium magnet systems for ultra-efficient signal transfer.
- Exceptional audio quality for professional monitoring and mixing
- Collapsible design ideal for easy portability and convenient storage
- Proprietary 45 mm large-aperture drivers with neodymium magnet systems
- Closed-back cushioned earcup design creates an outstanding seal for maximum isolation
- Adjustable padded headband for comfort during long mixing/recording sessions
- Single-sided straight cable terminates to gold-plated mini-plug with screw-on ¼" adapter
Features
Type |
Closed-back dynamic |
Driver Diameter |
45 mm |
Magnet |
Neodymium |
Voice Coil |
CCAW (Copper-clad aluminum wire) |
Frequency Response |
15 - 28,000 Hz |
Maximum Input Power |
1,600 mW at 1 kHz |
Sensitivity |
99 dB |
Impedance |
38 ohms |
Weight |
284 g (10 oz) without cable and connector |
Cable |
3.5 m (11.0'), OFC litz wire |
Connector |
Gold-plated stereo 1/8" (3.5 mm) connector with strain relief and professional screw-on 1/4" (6.3 mm) adapter |
Accessory Included |
Protective pouch |
Musictoyz.com Price $159.00

ATH-M40fs
Audio-Technica’s premium professional studiophones offer a flat, extended frequency response for professional studio monitoring. Superior components provide very high SPL capabilities while maintaining exceptional clarity of sound. Exterior design features include sturdy strain-relief cable and comfortable circumaural earpieces that can be rotated 180º to permit one-ear monitoring. The studiophones utilize 40-millimeter drives with neodymium magnets and copper-clad aluminum wire voice coils for lowest mass. They are equipped with an 11-foot cable terminated in a standard ¼-inch connector. This field-serviceable model allows elements, cables, and earpads to be replaced in the field if needed.
- Flat, extended frequency response for mixing/monitoring
- Field-replaceable cables, drivers and ear pads
- 1,600 mW of power handling, high SPL capability
- 40 mm diameter drivers, neodymium magnets and CCAW voice coils
- OFC litz wire cables, convenient one-side exit
- Rotating earpieces for easy one-ear monitoring
Features
Type |
Closed-back dynamic |
Driver Diameter |
40 mm |
Magnet |
Neodymium |
Voice Coil |
Copper-clad aluminum wire |
Frequency Response |
5 - 28,000 Hz |
Maximum Input Power |
1,600 mW at 1 kHz |
Sensitivity |
100 dB |
Impedance |
60 ohms |
Weight |
8.8 oz (250 g) without cable |
Cable |
11' (3.4 m) (OFC litz wire, left-side exit) |
Connector |
1/4" (6.3 mm) phone plug |
Musictoyz.com Price $69.95
ATH-M2X
Engineered for digital program materials, the ATH-M2X open-back dynamic stereo headphones are equipped with high-performance drivers and low-mass diaphragms for maximized power handling capability. They provide a clean, linear low end response, and include an 11.5' cable with 3.5 mm stereo mini-plug and 1/4" (6.3 mm) phone plug adapter.
- Specifically designed for digital program materials
- High-performance drivers and low-mass diaphragms
- Maximized power handling capability
- Clean, linear low end response
- 11.5' cable with 3.5 mm stereo mini-plug
- 1/4" (6.3 mm) phone plug adapter included
Features
Type |
Open-back dynamic |
Driver Diameter |
40 mm |
Frequency Response |
20 - 20,000 Hz |
Maximum Input Power |
100 mW |
Sensitivity |
100 dB |
Impedance |
32 ohms |
Weight |
4.0 oz (115 g) |
Cable |
11.5' (3.5 m) |
Connector |
3.5 mm stereo mini-plug |
Accessory Included |
1/4" (6.3 mm) plug adapter |
Musictoyz.com Price $29.95
|