Loading... Please wait...
FREE SHIPPING ALL US ORDERS OVER $99

Our Newsletter

sign up today and save big on your next order

 

  • Image 1

Pete Cornish Battery Free P-2

$799.95
SKU:
CORN03
Shipping:
Calculated at checkout

Sorry but this item is currently unavailable.

Please check back at a later stage.


TWO CORNISH PEDALS TOTAL TO A CUSTOMER !! PLZ DO NOT EBAY FOR PROFIT !! THERE TO BE USED !! Ships 12/16 to 18 approx

The P-2 's full, bright sound cuts through the mix effortlessly. This pedal was the recipient of the Editor's Pick Award from Guitar Player Magazine and received the following review: "The Pete Cornish P-2 delivers extremely fat, smooth, and harmonically rich distortion tones, ranging from a relatively mellow crunch to searing high-gain sustain.  The pedal is also extraordinarily responsive to playing dynamics, cleans up nicely with even slight guitar volume adjustments, and it provides nearly uncanny single-note definition within chords. Finally, it can crank out insane amounts of gain. Astonishing!  Extremely fat tone, quiet, great dynamics, infinite sustain, exceptional chord definition".

The input to this unique device is our universally acclaimed High Impedance, Unity Gain, Class A, Buffer Preamp with it's superior RFI rejecting capability (to eliminate Radio Station interference) and Low Impedance Audio output, allowing the use of extended cable runs from the P-2 in bypass mode. The fixed High Impedance load presented to the Guitar allows the pickups to operate at their optimum, even when several effects units are connected after the P-2. The Unity Gain Buffer also prevents "Ghost Distortion" being audible in Bypass Mode. This effect unit gets the most benefit from being fed into a clean, full frequency response amplifier and I recommend that when you receive your pedal you connect it up without anything else in line, just Guitar/Pedal/Amp, and discover the way the controls interact, both with themselves and the guitar/amp controls. Then adding the rest of your effects, you may find that you need to make slight adjustments to these as they are now being fed with a constant signal when the P-2 is in Bypass Mode.

FEATURES:

  • High Impedance RFI rejecting input and bypass buffer.
  • Each unit is hand built, wired and tested by Pete and Lynda Cornish.
  • Housed in a Rugged Die-cast box with ‘Chicken-Head' pointer knobs.
  • Heavy Duty all-metal footswitch with Hi-Brite, low power consumption LED.
  • Easy battery replacement via the ‘drawer'. The battery is switched on when you insert the “IN/PWR” jack and to ensure long battery life unplug this lead when the unit is not in use. If the unit is not to be used for a long length of time we recommend that you remove the battery. Preferred battery type is Alkaline.
  • The power consumption is very low: only 3mA in bypass mode and 4mA when the activated thus ensuring extended battery life.
  • Also fitted is an input for a DC adaptor: the size of the coax connector is 5.5/2.1mm and the centre pin is negative (-VE). The voltage rating of the adaptor should be noise free, fully stabilised at 9.6V and capable of supplying 20mA. We recommend the use of the BOSS PSA series adaptors (PSA-100/110/220 or 240 depending on your local AC supply voltage) as meeting the above criteria and cannot accept any liability for damage caused to this unit by the use of any other type of AC/DC adaptor.

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review

Customers Who Viewed This Product Also Viewed