|
The Pro Bender
 The Pro Bender is a take of the '60s Tonebender that was made famous by Page and Beck in the Yardbirds. Big fat smooth fuzz that can be used straight into a clean amp or mixed with a mild overdriven amp to give a truley huge solo sound ! Classic sound for the fuzzhead in us all !
They are made in the USA at Sweet Sound in Florida as you can see they come with a 2.1mm 9V DC jack in the front and they are made in 3 x 4 anodized aluminum box's which are very well made !
There is a internal trim pot that controls the voltage to the transistor in the Monterrey, Fillmore and Pro Tender. It's set to 4.5v but you may tweak it to what your ears think is best ! Nice little bonus !
Sweet Sound is behind due to illness, there is no ordering at this time sorry
Musictoyz Price $179.95 -- 
The Pi Face
 The Pi Face Vibe is a take off of the tri-angle muff sound of the early 70s and late 60s. As one of our forumites put it "It's a f***ing Jackhammer" ! Just think of fat fat fat fuzz overdrive that will just give tons of sustain for days and days. If you want a Smashing Pumpkins, Nirvana, early Santana sound...this is it.
They are made in the USA at Sweet Sound in Florida as you can see they come with a 2.1mm 9V DC jack in the front and they are made in 3 x 4 anodized aluminum box's which are very well made !
There is a internal trim pot that controls the voltage to the transistor in the Monterrey, Fillmore and Pro Tender. It's set to 4.5v but you may tweak it to what your ears think is best ! Nice little bonus !
Sweet Sound is behind due to illness, there is no ordering at this time sorry
Musictoyz Price $169.95 --
The Montery Fuzz
 The Montery Fuzz is a classic Germinuim classic style fuzz from the 60s. Hence the name of Montery after the classic Hendrix show in 1968 that brought Jimi to the stats. If your looking for a Fuzz Face type of sound in a well made package this is it !
They are made in the USA at Sweet Sound in Florida as you can see they come with a 2.1mm 9V DC jack in the front and they are made in 3 x 4 anodized aluminum box's which are very well made !
There is a internal trim pot that controls the voltage to the transistor in the Monterrey, Fillmore and Pro Tender. It's set to 4.5v but you may tweak it to what your ears think is best ! Nice little bonus !
Sweet Sound is behind due to illness, there is no ordering at this time sorry
Musictoyz Price $169.95 --
The
Fillmore West Fuzz
 The Filmore West is a silicon style based classic fuzz of the late 60s late 70s. More piercing and raspier than the Montrery Fuzz ! If you want a fuzz to mix in your signal that will cut right thru this is it !
They are made in the USA at Sweet Sound in Florida as you can see they come with a 2.1mm 9V DC jack in the front and they are made in 3 x 4 anodized aluminum box's which are very well made !
There is a internal trim pot that controls the voltage to the transistor in the Monterrey, Fillmore and Pro Tender. It's set to 4.5v but you may tweak it to what your ears think is best ! Nice little bonus !
IN STOCK
Musictoyz Price $169.95 --
 The MoFaux Vibe
The MoFaux Vibe is designed for the musician that wants the basic Original Uni-Vibe sound in an
economical and small package. While not a "true" original Uni-Vibe circuit it does get surprisingly
close and is not meant to be a full blown Vibe such as the Mojo Vibe. Here are a few clips I did of the
prototype MoFaux vibe (please do not link to these as they will be gone soon as I get a chance to do
some new ones)
MoFaux Slow (in stereo)
MoFaux Medium (in stereo)
MoFaux - Cry Baby > MoFaux > Habenero Boost > Unfinished overdrive > Amp (60's Black Face Fender)
Features
9 volt DC adapter or 9 volt battery operation
Hand matched FET transistors to insure full spectrum sweep
Very small foot print
MoFaux Slow (in stereo)
MoFaux Medium (in stereo)
MoFaux - Cry Baby > MoFaux > Habenero Boost > Unfinished overdrive > Amp (60's Black Face Fender)
Sweet Sound is behind due to illness, there is no ordering at this time sorry
Musictoyz Price $129.95 --
Mojo Vibe
 Praised by pros and semi pros alike for it’s authentic "Vintage Uni-Vibe" sound, the Ultra Vibe has been known as "the one to own". And now the Mojo Vibe picks up where the Ultra Vibe left off. At half the size ( approx. 4 1/2" X 4") and weight of the original Ultra Vibe the Mojo Vibe will leave you with more real-estate on your pedalboard than any other true vibe effect available.
The Mojo Vibe is not a bells and whistles type of effect. The features have been chosen from customer suggestions and usability from my own experience as a professional player for over 35 years. So if you want simply the best vintage Uni-Vibe sounding pedal available, then look no further than the Mojo Vibe.
Features
9 volt DC powered-
Now you can use those nice power supplies that are available or the optional wall wart. (see bottom of this page) That 9 volts DC is converted to 18 volts DC internally to retain headroom and ability to use the original bulb that is so very important in getting the right "throb" or "wobble" in the sweep.
Internally switched FET buffer pre-amp-
Switched with a miniature DIP switch, you can choose the warm vintage input configuration or a modern fet buffered input for a brighter sound. This differs in that most vibe makers switch a simple resistor in and out for the two different styles, but it still chokes off the response of your guitar. With the fet buffer this will not happen. The only time the buffer (when selected) is present is when the effect is engaged. Not to be confused with a buffered bypass. It is still true bypass.
Speed Controller Input-
Just about any passive type volume pedal or expression pedal will work with the Mojo Vibe. Of course some better than others, due to the value of the pot in the pedal. The ideal value would be a 100K reverse log taper. But I have found that many other values will work satisfactorily. To conserve space the Mojo Vibe uses a ¼" stereo tip, ring, sleeve switching jack for the controller input. You can use it as is with expression pedals where the cord is already connected to the pedal such as Roland, Korg, Ensoniq and other keyboard expression pedals. To use a passive volume pedal you will need a special cord that consists of a ¼" stereo plug on one end and splits into two mono ¼" plugs. These are the same cables used in the channel inserts on mixing consoles and are readily available at most music stores.
Chorus / Vibrato Switch-
Ok, so it’s not really a chorus as we know them, but we’ll stay with the original terminology. This uses a short bat (so it’s hard to break off) miniature toggle switch to decide the output. Either the original "chorus" / Uni-Vibe sound or a wild vibrato can be chosen with this switch.
Volume Control-
Adjust the output to match the input level.
Intensity Control -
Adjust the depth or "intensity" of the effect, also effects the bias of the sweep to some degree.
Speed Control-
Adjusts the speed of the sweep. From a slow rolling phase to a bubbling, watery, pulsing throb.
 True Bypass-
with LED that pulses in time with the speed setting.
Aluminum Case-
Chosen over steel for superior shielding properties and lighter weight.
Music Toyz.com Network Video Demo
To Hear the Vibe Unit !!
Sweet Sound is behind due to illness, there is no ordering at this time sorry
Musictoyz Price $269.95 --
Sweet Sound is behind due to illness, there is no ordering at this time sorry
Swirl Painted Vibe
Musictoyz Price $299.95 --
|
Top of Page
