|
|
Ultra ChorusII
 DLS has once again designed one of the warmest chorus effects in the industry! The Ultra ChorusII is two chorus units in one. The musician can preset both chorus channels and switch between the two on the fly! A Blend control allows the musician to mix as much analog instrument with our wonderful chorusing sound. As with all DLS Effects, the analog instrument always stays analog! Choose from any hookup option (Mono in-Mono Out, or Mono in-Stereo Out, or Stereo in-Stereo Out). Internal trim pots allow the musician to dial in levels of InputA-OutputA, InputB-OutputB and Chorus Regeneration to taste.
The Ultra ChorusII is truly one of the sweetest sounding and most powerful chorus effects on the market today. It's quiet, pristine, versatile, and allows the musician to dial in the sound they are after. DLS effects are extremely well constructed using a heavy steel enclosure, steel switches, steel pots, and a beautiful powder coating to withstand every road environment.
- Extremely warm, and versatile sounds
- Analog instrument signal is maintained and mixed with the Chorus effect.
- Stereo output for lush, full chorus effects
- Two separate Chorus sections that can be preset and Footswitch selected, on the fly
- 7 positions of selectable Delay for a multitude of chorus sounds
- Multiple controls allow the musician to control their own sound
- Custom-designed electronics
- Designed and manufactured in the USA by engineers who are also musicians
- Rugged all-steel enclosure, steel pots and steel jacks
- Every effect is tested by an engineer/musician
- True Bypass Switching
- 9vdc input, any polarity (worry-free if using your 9volt pedal board supply)
- 9vdc transformer included
Controls:
Blend: Controls the blending of Chorus effects with straight instrument (straight instrument stays analog)
Chorus1 Rate, Chorus1 Depth: Controls rate and depth of Chorus 1 section
Chorus2 Rate, Chorus2 Depth: Controls rate and depth of Chorus 2 section
Chorus1 LED: Blinks at to the Chorus1 Rate
Chorus2 LED: Blinks at to the Chorus2 Rate
Chorus2/Chorus1 Footswitch: Selects between Chorus 2 and Chorus 1 sections
Delay Scale: 7 delay selections to widen or narrow the chorusing sound
Two inputs and two outputs for: Mono in-Mono Out, or Mono in-Stereo Out, or Stereo in-Stereo Out (all ¼" steel jacks)
True Bypass On/Off Switch: Engages the effect when On (green LED will light), True bypass when Off.
Internal INA Pot: Adjusts the gain level of Input A
Internal OUTA Pot: Adjusts the volume of OUTA
Internal INB Pot: Adjusts the gain level of Input B
Internal OUTB Pot: Adjusts the volume of OUTB
Internal CHORUS REGEN Pot: CCW for swirly chorus, CW for dry chorus
Musictoyz.com Price $289.95
 
Roto-Sim
 Finally someone has put toghther the TRUE Leslie Simulator ! No more dragging cabs and leslie units around. Or even just trying to find one to record with. No more I the almost got sound of other simulation units. This is it !
If you want the true sound of the spinning speaker this is the unit. You can create this sound and tweak it to get it exactly as "you" hear it. There are tons of controls on the outside and 7 trim pots inside for further tweaking.
Made in the USA by the fine craftsman at DLS
Features:
· Top Adjustment pots to separately adjust Fast and Slow speeds (12:00 position are the
actual speeds in a real rotating speaker system).
· Ramp time pot
· Tweeter Level pot (add or reduce amount of tweeter mixed)
· Bass Level pot (add or reduce amount of bass mixed)
· Expression Pedal input
· Internal Blend pot to mix the amount of un-processed analog signal with RotoSIM signal
· Internal Pot to adjust how much time the Bass rotor lags the Tweeter speed
· Distortion On/Off toggle switch
· Distortion Gain Pot (when distortion is switched On)
· Mono in-Mono Out, Mono in-Stereo Out, or Stereo in-Stereo Out
· Fast or Slow speed switch
· On/Off switch with True Bypass switching
· Internal trim pots to adjust Input Levels and Output Volumes of INA, INB, OUTA, OUTB
· Runs from 9vdc (any polarity jack)
Musictoyz.com Price $299.95
DLS Tap Delay
 This custom EchoTAP delay has a TAP Tempo echo and a Panel settable echo that the musician can switch between on the fly. The TAP Tempo can be set from 30ms to 3 seconds; the panel echo can be set from 50ms to 3 seconds. The TAP tempo and the Panel set echo have their own separate ECHO VOLUME controls. This is useful because many musicians use two different echoes and volumes during a single composition.
The TONE control shapes the echoes from crystal clear replications to spacey echoes like the older tape echo units. The EchoTAP has two inputs and two outputs for use in stereo in/out, mono in/stereo out, or mono in/mono out (all Inputs and outputs utilize True Bypass switching). As in all DLS units, we use the analog instrument signal and mix it with the echo signals (this leaves your instrument sound and tone as is).
Features:
- True Bypass Switching!
- Two Echoes in One. (One TAP settable echo, one Panel settable echo, Both echoes are independently settable for up to 3 seconds long!)
- Both echoes can be switched between on the fly.
- Individual TAP echo volume, and Panel echo volume controls.
- Tone control for the echoes to achieve the multitude of delay sounds
- Repeat control (Controls a single repeat to many repeats)
- Two inputs and Two outputs so the musician can use (Stereo in:Stereo out) or (Mono in:Mono out), or (Mono in:Mono out).
- Analog instrument signal is maintained and mixed with the echoes.
- Extremely warm sounding and versatile.
- All steel enclosure, steel pots, and steel jacks
- Powder coated enclosure (more durable than standard painting)
- 9vdc input, any polarity (Worry free if using your 9volt pedal board supply)
- 9vdc transformer included
- Designed and manufactured in the USA by engineers who are also musicians
- Every effect is tested by an engineer/musician
- Enclosure is solid heavy gauge steel 5.5"W x 4.9"D x 2.4"H
- Weight: 2½ lbs.
Musictoyz.com Price $289.95
Stereo Chorus / Vib
 This custom Chorus, Vibrato, and Leslie effect was designed by engineers who are also musicians. This effect is for the professional who is looking for extremely high quality sound and robust construction. This design effort has produced one of the warmest-sounding, versatile, and most powerful effects in the industry. This effect is constructed using a heavy steel enclosure, steel switches, and steel pots to withstand every road environment. Every custom effect is checked by ear by an engineer/musician before it is qualified to be sold. These effects are quality crafted in the USA.
· True Bypass Switching
· Chorus, Vibrato and Leslie effects all from one pedal
· Chorus Rate, Depth, Blend, and Delay controls for the musician to dial in multiple chorusing sounds from mild to Wildly Liquid
· Stereo outputs for lush, full chorusing
· Two outputs to choose from (One bright, one normal, or both for Stereo)
· Extremely warm sounding and versatile
· Multiple controls allow the musician to control their own sound
· All steel enclosure, steel pots, and steel jacks
· Powder coated enclosure (more durable than standard painting)
· 9vdc input, any polarity (Worry free if using your 9volt pedal board supply)
· Designed and manufactured in the USA by engineers who are also musicians
· Every effect is tested by an engineer/musician
Controls:
Blend: Controls the blending of Chorus, Vibrato or Leslie effects with straight guitar
Chorus1 Rate, Chorus1 Depth: Controls rate and depth of Chorus, Vibrato, or Leslie
Delay Scale: 7 delay selections
On/Off: True Bypass Footswitch to select between straight guitar and Chorus effects.
Electronics:
Technology: Analog and 16bit digital electronics
Sample rate: 44.1KHZ, 256x over sample
Outputs: Output A (Normal)
Output B (Bright)
Power: 9vdc, 200ma, 2.1mm jack
(DC adapter included)
*Our internal circuit will accommodate any polarity
of input jack.
Mechanical:
Enclosure: Solid heavy gauge steel
5.5"W x 4.9"D x 2.4"H
Controls: Steel switches, pots, and ¼" jacks
Weight: 2½ lbs.
Sound File Chorus
Sound File Leslie
Sound File Vibrato
True Bypass Version
Musictoyz.com Price $189.95
|
Top of Page
