|
|
Slant V6
 The 40 watt Slant 6V offers an impressive range of legendary American and British tones, and unprecedented versatility and usable power without sacrificing the warmth, clarity and handbuilt, all-tube tone that are the hallmark of our amplifiers. At the heart of the Slant 6V are two independent, foot-switchable channels: Channel One bridges our shimmering clean tone with gutbucket, overdriven blues, while the dual gain settings on Channel Two offer pure tube crunch, soaring sustain and fluid dynamic response. The Slant 6V can be operated at half-power in cathode bias (18W) or fixed bias mode (22W), yielding tones reminiscent of early tweed and AC-style combos in cathode mode, and a punchier, more tightly defined sound in fixed bias mode. And at full power, the Slant 6V runs four 6V6 output tubes split in cathode and fixed bias pairs, placing every conceivable classic tube tone at your fingertips. An 80W 'Double Power Slant 6' is also available for players seeking even more headroom, power and punch.
- Two independent foot-switchable channels
- Channel one: classic clean to blues grit with reverb -Channel two: sixties crunch to screaming sustain (two gain settings)
- 5AR4 Tube Rectifier
- Unique dual bias output stage
- At half-power settings, the Slant 6V uses either cathode bias, like early tweed and British AC style combos; the inherent natural compression delivers plentiful sustain and tasty harmonic distortion while giving the player super feel and control over the amp's dynamics; in the fixed bias setting, the amp acts more like modern American and British classics, delivering a punchy attack, more power, and a tighter sound
- At full power, the Slant 6V uses four power tubes, two in cathode bias, and two in fixed bias; this truly unique feature combines the best of both worlds for a sound that is warm and rich, with plenty of depth and sweet harmonics, yet punchy and defined
- 6V6 EH output tubes
- Floating baffle board
- 4, 8, and 16 ohm output impedance selector
- 40 watt dual bias output stage
- switchable half-power settings (cathode [18w] or fixed [22w] bias)
- Available in combo or head cabinets
- Double power (80w) Slant 6V Available
- 8 Ohms
Tube compliment:
Front row near baffle right to left as looking from back of amp
V1 - 12AX7EH - first and second gain stage Clean Channel
V2 - 12AX7EH - reverb return and mix stage stage Clean Channel
V3 - 12AX7EH - first and second gain stage Overdrive Channel
V4 - 12AX7EH - third gain stage and cathode follower Overdrive Channel
Middle row right to left as looking from back of amp
V5 - 12AT7 - reverb driver
V6 - 12AT7 - phase inverter
Back row right to left as looking from back of amp
V7, V8, V9, V10 - quad mathced 6V6EH power tubes
V11 - 5AR4/GZ-34 tube rectifier
Double Power SLANT 6V
Same ase regular Slant 6V except
V7, V8, V9, V10 - quad matched 6L6GC Svetlana powdr tubes
Also no tube rectifier (V11) - instead internal Ultra Fast Recovery rectifiers
Controls:
Clean Channel: Volume, Treble, Middle, Bass, Reverb
Overdrive Channel: Volume (drive), Gain Mode switch, Master, Treble, Middle, Bass
Dimensions:
Slant 6V 1-12
24" wide by 19" tall by 10" deep at the bottom sloping to 8.75" deep at the top
55 Lbs
This amp pictured is IN STOCK.
Its a CREAM 1-12 combo, with REVERB ON THE OVERDRIVE CHANNEL !
Back of amp picture!
Musictoyz.com Price $2999.95
 
Vinceroy !
 The 33/7 watt Vinceroy is our newest dual 6L6, classically American amplifier designed to deliver a full range of clean and overdriven sounds for home, stage, and studio.
Features
- Class A
- Dual 6L6 output tubes
- Two power levels: 33 or 7 watts
- Unique variable drive control
- Footswitchable fixed boost (lighted footswitch included)
- Tube reverb
- 100% hand wired
- Solid pine dovetailed cabinet built in house
- Eminence Wizard speakers
Description
The 6L6 Vinceroy is biased deeply into Class A, yielding a pushed, ready-to-jump feel. The vibe from The Vinceroy is explosive and forward-tilting. It distorts very well in a large curd Tweedish way when cranked, and the clean tone is gorgeous and dimensional. The 1x12 is wonderfully compact.
Features include reverb, two power levels (33 or 7 watts), a variable drive control (internal clean boost which gives the amp more push and OD when the amp is turned up - you can hear more of the winding on strings and dynamic, super twang), and a footswitchable fixed boost (partial tone stack bypass) which greatly increases midrange punch and yields a wonderful grind. The resulting volume increase is just right for a solo, or if the amp is really overdriving, it thickens and adds sustain. Lighted footswitch included.
Controls include volume, treble, mid (with panel on/off for boost), bass, reverb, drive, and
Top panel Picture
Side Profile Picture
Chet-like (310k mp3) - Gretsch 6120-1960, The Vincent 1x12
Li'l Vinnie (228k mp3) - Gibson Les Paul Jr., The Vincent 1x12
Musictoyz.com Price $ 2490.95
Mercury !
 Our newest amplifier inspires visions of a classic cabinet design from a time long ago, but within the chassis of the Mercury you'll discover an inspiring and truly innovative circuit (along with utterly remarkable tone.) While it is true that your friends, band mates and family members will admire the Mercury for its good looks and 'polite' power rating, Mercury owners seem to cherish our newest amp for many other practical reasons. Our exclusive power attenuating circuit enables the Mercury to be played at 8, 2, 1/2 and only 1/10 watts, with no appreciable change in tone, yet the Mercury easily yields enough clean headroom for club work. Add our renowned reverb circuit, a 3-position boost switch for subtle-to-intense output tube distortion, plus the incomparably thick and rich tone of a single KT-66 power tube, and the Mercury will earn its rightful place among your most treasured instruments.
- Class A
- Single-ended fixed bias KT-66 output stage
- Single channel: bass, treble, reverb
- 3-position boost switch
- Treble cut switch
- Built in 4 position attenuator (8, 2, 1/2, 1/10 watt)
 Tube compliment:
From right to left looking at the back of the amp
V1 - 12AX7EH - first and second gain stage
V2 - 12AT7WA - reverb drive
V3 - 12AX7C - reverb return and mix stage
V4 - EL-34 power tube
Controls:
Volume, 3-position Boost, Treble, Bass, Reverb,Treble Cut, 4 position attenutor
Dimensions:
Mercury-12" Combo - 21" w x 17.5" h x 10" d
at bottom sloping to 9" at top.
Weight: 35 lbs.
Special thanks to Eric Cummins head salesman of Willcutt Guitars in KY for suggesting we persue a low powered amp design.
NOTE: From this point forward (8/1/04) we will be shipping Mercury amps with JJ brand EL-34s instead of KT-66 tubes. We have been having trouble with reliability, consistency, and availability of KT-66 tubes. I have spent the last few months evaluating alternate choices and the EL-34 is my favorite - in fact I prefer it to the KT. Best, Steve Carr
IN STOCK BLACK and CREAM & BURGUNDAY COMBO !
Rambler !
 Long before the birth of Carr Amplifiers, I spent years playing, repairing, modifying and intently listening to classic guitar amps. The Rambler was one of my earliest signature designs, and today it is still one of our most popular models. Why? It's no accident that the Rambler succeeds in delivering classic American 'deluxe' tone with dramatically expanded clean headroom, solid bass response and the option of 28 watt pentode or 14 watt triode operation. The Rambler simply reflects my desire to improve and refine the original concept of an appropriately powered 1x12 club amp with reverb and tremolo. Rambler owners describe their amps as being warm, full and round, with a surprisingly high threshold of clean tone, (which also makes the Rambler uniquely suited to virtually any overdrive pedal ever built). The Rambler is considered by many to be the quintessential club amp, voiced to meet the needs of virtually any player, and all types of music.
- Class A cathode bias 6L6 output stage
- Zero feedback
- Single channel with reverb and tremolo
- Pentode-Triode power switch
- 28 watts pentode
- 14 watts triode
- Compact size
Tube compliment:
From right to left looking at the back of the amp
V1 - 12AX7EH - first and second gain stage
V2 - 12AT7WA - reverb drive
V3 - 12AX7WA - reverb return and mix stage stage
V4 - 12AX7EH - phase inverter and tremolo
V 5, V6 - Pair matched 6L6GC Svetlana - power tubes
IN STOCK IN BLACK READY TO SHIP !
Musictoyz.com Price $ $2290.95
Hammerhead !
 28 watt EL-34 Hand Wired Class A combo and now Head. The Hammerhead MK II offers rich output tube overdrive with a unique personality and super simple signal path. Rock, hot blues, and pop guitarists will find wide range of tones from semi-clean to full on overdrive with just the right amount of vintage funk. The MK II offers a new single knob tone circuit with On/Off switch. Fully redesigned power supply vastly improving openness and 'Feel' while increasing sustain and clarity.
New Head design and 1-12 or 2-12 closed back extension cabinets with asymmetrical curved backs for surprising low end in a small package loaded with Cannabis Rex speakers by Eminence. All cabinets solid pine using dovetailed corners.
- Class A
- Zero Feedback
- EL-34 Powered
- 28 Watts Single channel
- Canniabis Rex Speakers by Eminence
- Unique tone section with ultra-pure signal path
- Controls:
Volume - Impact - Master - Grip - Tone
Tube Compliment:
From right to left looking at the back of the amp
V1 12AX7EH - first gain stage
V2 12AX7EH - phase inverter
V3,V4 Matched pair of JJ E34Ls
Controls:
Volume, Impact (Treble and upper mid emphases), Master, Grip (Pre amp gain), Tone (potentiometer with on/off to take the tone circuit out for added gain)
Dimensions:
Hammerhead MK II Head
21" wide by 8.5" tall by 11" deep inclluding feet.
24 Lbs
1-12 Extension Cab
27.5" wide by 17.75" tall by 11" deep
30 Lbs
2-12 Extension Cab
21" wide By 28.25" high by 11" deep
48 Lbs.
Combo Dimensions:
Hammerhead 1-12
21" wide by 18" tall by 10" deep at the bottom sloping to 9" deep at the top
38 Lbs
Hammerhead 2-12
27.5" wide by 18" tall by 10" deep at the bottom sloping to 9" deep at the top
49 Lbs
SOLD OUT
Musictoyz.com Price $1849.95
|
Top of Page
